Electrical
- Switches
and Receptacles
- Reset
GFCI’s – push reset button on outlet
- Repair/replace
electrical covers and plates
- Tighten
outlet screws if loose (wall, floor, ceiling)
- Check
outlets for power – use plug-in GFI tester
- Check
and reset breakers – be sure to flip breaker to off position before
resetting
- Replace
cord caps
- Replace
switches and outlets – be sure breaker is turned off at panel and use
proper lock out/tag out procedure before replacing
- Lighting
- Check
and reset time clocks accordingly (exterior)
- Replace
lamps
- Replace
diffusers and tombstones
- Replace
ballasts – be sure light switch is off and use proper lock out/tag out
procedure before replacing. If
this is a security light, the breaker will need to be shut off.
- Emergency
and exit lighting
- Check
to see if lights are working properly – push test button on fixtures
- Replace
batteries if unit does not work